3151智能式插入筒凸式液位计水处理使用的六大优势工况

来源:液位传感器生产 发布时间:2020-09-15 11:25:38 浏览次数:


3151智能式插入筒凸式液位计水处理使用的六大优势工况体化地埋式生活污水处理中的混凝剂主要用于生活饮用水和工业废水的净化.对于特殊水质的处理

1.重力掺杂:重力用于将药物添加到水泵的吸水管或吸水井的吸水罩中,水泵叶轮用于混合.


1. Gravity doping: gravity is used to add drugs to the suction pipe of the pump or the suction cover of the suction well, and the impeller of the pump is used for mixing


2.压铸:泵或喷射器用于将药物施加到原水管上,该原水管适合于将药物施加到压力水管上或高海拔和长距离的净水结构上.


2. Die casting: the pump or injector is used to apply drugs to the raw water pipe, which is suitable for applying drugs to the penstock or the water purification structure with high altitude and long distance


3.增加了泵:将泵添加到溶液罐中,以将液体提升到压力管中. 计量方法有两种:直接采用计量泵,采用耐酸泵和转子流量计.


3. Add a pump: add the pump to the solution tank to lift the liquid into the pressure pipe. There are two metering methods: direct metering pump, acid resistant pump and rotameter


4.添加了弹出器:通过从喷嘴和喉咙吸入高压水(压力> 0.25MP),将喷射器泵入高压水管.弹出器应配备测量设备.普通自来水厂的供水管压力高,使用方便.


4. The ejector is added: the ejector is pumped into the high-pressure water pipe by suction of high-pressure water (pressure > 0.25mp) from the nozzle and throat. The ejector should be equipped with measuring equipment. The water supply pipe of ordinary water plant has high pressure and is easy to use


3151智能式插入筒凸式液位计使用的六大优势工况特点:


The six advantages of 3151 intelligent plug-in barrel convex level gauge are as follows:


结构简单:无任何可动或弹性元件,因此呆靠性极高,维护量极少。


Simple structure: there is no movable or elastic element, so it has high reliability and little maintenance.


安装方便:内装式结构尤其显示出这一特点,无需任何专用工具。


Easy to install: the built-in structure especially shows this feature without any special tools.


调整方便:零位、量程两个电位器可在液位检测有效范围内任意进行零点迁移或量程的改变,两个调整互不影响。


Easy to adjust: the zero position and range of the two potentiometers can conduct zero point migration or range change arbitrarily within the effective range of liquid level detection, and the two adjustments do not affect each other.


用途广泛;适用于高温高压、强腐蚀等介质的液位测量。


It is widely used in liquid level measurement of high temperature, high pressure, strong corrosion and other media.

3151智能式插入筒凸式液位计水处理使用的六大优势工况/法兰安装式凸膜片差压变送器可避免被测介质直接和变送器的隔离膜片接触,它适用于下面几种情况:

1、被测介质对变送器接头和敏感元件有腐蚀作用时;


1. When the measured medium has corrosive effect on the transmitter connector and sensitive element;


2、需要将高温被测介质与变送器隔离时;


2. When it is necessary to isolate the high temperature measured medium from the transmitter;


3、被测介质中有固体悬浮物或高粘度易堵塞变送器接头和压力容室时;


3. When there are suspended solids or high viscosity in the measured medium, the transmitter connector and pressure chamber are easily blocked;


4、被测介质用引压管引出易固化或结晶时;


4. When the measured medium is led out by a pressure pipe and easy to solidify or crystallize;


5、更换被测介质需要冲洗而不容交混时;


5. When the medium to be tested needs to be washed but not mixed;


6、必须保持卫生条件,防止污染时;


6. When sanitary conditions must be maintained to prevent pollution;

公司位于西安市高新技术开发区,拥有经验丰富的变送器技术开发和工艺、质量管理人员。主要技术人员先后多次接受过美国ROSEMOUNT公司的技术培训,有十多年的变送器生产及研发经验。早在上世纪九十年代初期,已经开始致力于HART协议压力及液位计的探索和研发,是国内智能仪表及HART协议技术的开拓者,领航者。


华恒仪表圈:


1,经济“内循环”下,仪器企业如何实现转型突围?

 当然,技术引进的目的是为了消化吸收,最终形成自己的核心技术。核心技术是企业的立足之本,只有拥有核心技术才能在竞争激烈的科学仪器行业保持屹立不倒。为了拥有自己的核心技术,

研发方向包括智能化、远程控制、物联网等,特别是色谱仪器和生化实验室仪器等。同时,天美也会继续寻求海外相关产品及技术的收购、引进,增强自身竞争力,如生物安全柜、超低温冰箱、培养箱等生化产品。


2,仪器企业选个对的地方是多么重要!


对于仪器人来说,公司的选址是研发生产销售的开始:大到区域政策,小到房租水电,有许多因素应当被纳入考量。

它的营商环境良好,政府领导关心仪器企业成长,特别推出了促进科学仪器行业发展的补贴政策;它的产业环境优良,附近大学集聚可输送大量人才,供应链配套成熟方便生产,仪器行业上下游企业集聚促进销售与协同创新;它的各项服务齐全,企业可以就近申请享受工商咨询、设备共享、政策申报等服务…



上一篇:3151防腐型磁致伸缩液位计安装需要注意的四个特征

下一篇:隔膜式差压液位变送器化工密闭罐迁移量问题处理(三)

相关热词搜索:


3151插入筒液位计 ,液位变送器使用